800.732.2510

189

gw6000
GRAPHIC WHIZARD 6000 AUTOFEED NUMBERING
GWGW6000
The GW6000 numbering, perforating, top/bottom slitting and scoring machine runs 6,000 A4 sheets per hour. It is the most popular of the GW range. All GW models are single phase 240 Volt and all are designed to take either a single sheet from 60 gsm NCR up to 10 part NCR fan-apart glued sets or heavier board. You can ‘crash’ number the glued sets with the top copy numbered in red or black. With responding copies of a set crash numbered you know there is never a missing number as might occur when pre-numbered stock is collated. This model can take up to 2 numbering heads for a total of 20 numbers per sheet and can be upgradeable to the GW8000 or 12,000 series so it’s the best starting point.

Product Details

  • 3,000 sheets per hour.
  • 1 number per head per sheet.
  • 1 or 2 Numbering Heads.
  • Tabletop model with automatic feed.
  • Crash numbering up to 10 part carbonless.
  • Feed sets unglued or glued side.
  • Create snap sets while numbering.
  • Heads rotate & lock throughout 360 degrees.
  • Perforating options 2,4,6,8,12,16 teeth per inch (TPI), 42,50 and 72 Microperf TPI.
  • Accurate .010" register.
  • Ability to control depth of Perf/Score/Slit.
  • Microprocessor controlled with forward and backward stepping for easy programming.
  • Electrical: 115V/60Hz/5A or 230V/50Hz/3A
  • Speed: 6,000 sheets per hour, 3 speeds
  • Maximum Stock Size: 18” x 18” (45.7cm x 45.7cm)
  • Minimum Stock Size: 3”W x 5”L (7.6cm x 12.7cm)
  • Stock Weight: 12# 12 point (45-300gsm)
  • Impression Control:Electronic variable, crash up to 10 parts carbonless
  • Feeder: Friction
  • Length: 44” (1.12m)
  • Width: 27” (0.69m)
  • Height: 16” (0.26m)
  • Weight: 100 lbs. (45.5kg)
  • Floor Model: Tabletop, optional stand
  • Drive Unit Type: Electric
  • Maximum Number of Heads: 2
  • Numbering or Creasing Positions: 10
  • Job Memory: Current job only
  • Head Rotation: Lockable throughout 360
  • Repeat Action: Consecutive, 1x, 2x, 3x, 4x
  • Numbering Heads: Standard 6 digit reverse head and Optional 8 digit condensed head
  • Inking System: Inkpad with reservoir
  • Perf Blade Options: 2,4,6,8,12,16 teeth per inch
  • Microperf Options: 42 or 72 teeth per inch
  • Scoring Options: Standard wide or narrow
  • Slitting Blade: Optional
  • Register Board: Optional
  • Conveyor Outfeed: Optional
  • Air Feed: Optional
  • Drive Unit with Reverse Head: 1
  • Accessory Holder: 1
  • 12 tpi Perf Blade 1
  • Score Blade 1
  •  Auto feed numbering system
  • Tabletop machine
  • Programmable
  • Single head
  • Single accessory holder with 12 TPI perf blade and score blade